This was a good weekend project-wise. Crazy Quilter on a Bike had a weekend retreat. It mostly ran on Sunday, but there were a couple of hours on Saturday that gave me enough time to prep a project that has been sitting on my cutting table for over three months now.
My sewing machine has two extended beds. I can’t remember if I actually shared this officially or not, so we might as well go over it now. Red (my mum’s machine) was sold with an extended bed included, but of course companies find ways of making you spend more to have the same amount. The new sewing machine beds are fairly high tech, though, so I don’t really mind spending the money to get a lot nicer product than the one that comes with Red. The first bed extender was a Husqvarna Extension Table that is designed to fit certain ranges of machines. It adds a nice amount of extra space so you have a place to rest your hands on either side of the needle and to hold up your project. This particular model also has a gentle slope at the front so it doesn’t dig into your arms or palms. I used this exclusively for the first year I had the machine and I’m using it right now with my limited desk space. It is an amazing product and I highly recommend it, but I upgraded to a bigger bed with a version of the Quilter’s Table. It provides a much larger flat surface which is AMAZING for free-motion quilting as it gives the quilt more slip/less drag. I cannot remember the company name of the one I bought, but I got it through my dealer. It came in three sizes I believe? Or four? I got the middle/second largest. It still more than doubled the bed space I had with the Extended Table and the larger size simply wouldn’t fit on my 6-foot sewing table. Up until I moved my office desk into my room, this was the extension bed I had set up all the time.
The question you should be asking is “How do you store the unused table?” Easy! In the box it came in! … until I went to put the Quilter’s Table away. That’s when I discovered that Husband had turfed the admittedly large and awkward Quilter’s Table box. Yaaaaaaay. So my plan was to make a protective case for it. I picked out the fabric, batting, and yes – even a zipper. Then … well, you’ve seen my blog posts over the last few months. Time has not been in free supply. This weekend, though, I was bound and determined to get that fabric off my cutting table and the Quilter’s Table off my pressing table. My iron got WAY too close for comfort a few times!
Saturday night: I had the outer fabric and the batting already basted, so I quilted it in simple, wide-set lines to make up a diamond shape. Instead of having the two sides open with it joined at the bottom like a normal person, I decided the best use of the fabric would be for the seam to run along the bottom and one side and have the fabric wrap around the other side. I was a little worried that would make inserting a zipper more difficult, but you know what? I actually liked the way it turned out better than the normal way. Less zipper bits to stitch over. There were tiny little rosebuds sprinkled in some of the stripes, so I decided to add a pocket to store the table’s feet in of the same colour. I originally intended for the pocket to be closed with a snap or button, but overlapping the panels and stitching around the whole thing seems to be just as effective. Doing it that way instead also let me have a new adventure!
Twin needles!!! These things are super neat on a domestic sewing machine, especially if you’re into making clothes. They simulate the cover stitch look you get with a serger. Red had a very old twin needle that came with it from Mum. I never tried it before as I was quite intimidated and now that I have a serger, I don’t have to fake that look. I decided to give it a try on this pocket, mostly to say I had done it at least once, but also because I was curious about the function. Well, let me tell you … I love the look!!! I’ve done this look a lot when I make bags just to get the double-line look, but stitching two rows side-by-side is never even. I think I may keep this needle on hand for future bag making. Another cool thing about them is that they come in different sizes, so you can have different widths. I may buy a pack to have on hand if this one breaks. It is older than me, after all, and I just levelled up last week.
The only thing that sort of needs attention on this bag is the liner. I cut it several inches too big, figuring I’d re-cut it fit when I went to insert it. Well … I don’t really care anymore. SURPRISE!!!! 😀 Actually, in my squashed state, I don’t really have the room to cut something that big and I’ve been using scissors a lot lately. I’m not super accurate with them either, so I figured it would be better if I left it too big than cut it too small. I just stitched the extra fabric as a fold. Maybe someday I’ll rip it out and make it pretty, but honestly – it’s a functional protective bag, I’m keeping it, and it’s staying zipped shut 99% of its life. I don’t really care that’s is a TARDIS. The added benefit of making it to fit my biggest table is that it has enough fabric to also fit my fatty smaller Extension Table whenever I go back to using the Quilter’s Table full time!
I finished this around 1PM on Sunday, which means I had time to get started on my UFO homework blocks. I got one totally done and the other most of the way done, and you know what? It was not as hard as I was dreading it would be! I may even get all the other blocks made before the February meeting and have another quilt top just about pieced together!! But we’ll talk about that NEXT TIME ON … DRAGONBALL Z!!!
I may have overplayed my millennial geek hand on that last reference.